AMERICAN BATTERY TECHNOLOGY Co (Form: 8-K, Received: 03/10/2023 13:46:35)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 8-K

CURRENT REPORT

PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Date of Report (Date of earliest event reported): March 8, 2023

AMERICAN BATTERY TECHNOLOGY COMPANY

(Exact name of Registrant as specified in its charter)

Nevada	000-55088	33-1227980
(State or other jurisdiction	(Commission	(IRS Employer
of Incorporation)	File Number)	Identification Number)

100 Washington Street, Suite 100

Reno, NV 89503

(Address of principal executive offices)

Tel: (775) 473-4744

(Registrant’s Telephone Number)

(Former name or former address, if changed since last report.)

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the Company under any of the following provisions:

☐	Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)

☐	Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)

☐	Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))

☐	Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

Securities registered pursuant to Section 12(b) of the Act: None

Title of each class		Trading Symbol(s)		Name of each exchange on which registered

Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter). ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Item 8.01 Other Events.

As first disclosed on Current Report on Form 8-K filed on March 7, 2023, on March 1, 2023, American Battery Technology Company (the “Company”) and LiNiCo Corporation (“LiNiCo”) entered into an asset purchase agreement and membership interest purchase agreement (collectively referred herein as the “Agreements”) for the purchase of a commercial hazardous waste recycling facility in the Tahoe-Reno Industrial Center located at 2500 Peru Drive, McCarran, Nevada and related industrial equipment. Pursuant to the Agreements, the Company acquired the industrial equipment from LiNiCo on March 1, 2023, for the purchase price of $6 million. The Company and LiNiCo are expected to close on the sale of the recycling facility by March 31, 2023, for the purchase price of $21 million. Pursuant to the terms of the Agreements, $1.5 million of the purchase price will be held in escrow for up to 18 months and be available for the settlement of indemnification claims made by the buyer under the Agreements.

On March 8, 2023, the Company issued a press release discussing the Company’s expansion to the Tahoe-Reno Industrial Center.

Item 9.01 Financial Statements and Exhibits

(d) Exhibits

Exhibit No.		Description

99.1		Press Release dated March 8, 2023
104		Cover Page Interactive Data File (embedded within the Inline XBRL document)

SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, the Company has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

	AMERICAN BATTERY TECHNOLOGY COMPANY

Date: March 10, 2023	/s/ Ryan Melsert
	Ryan Melsert
	Chief Executive Officer

Exhibit 99.1

Lithium-ion Battery Recycler ABTC Expands Operations with Purchase of Move-In Ready, Commercial-Scale Facility

The company is accelerating and expanding commercialization of its internally-developed, first-of-kind technologies in response to significantly increased demand for its products amongst rapidly growing domestic battery manufacturing industry

Reno, Nev., March 8, 2023 -- American Battery Technology Company (ABTC) (OTCQX: ABML), an American critical battery materials company that is commercializing both its primary minerals manufacturing and secondary minerals lithium-ion battery recycling technologies, entered into agreements for the purchase of a move-in-ready, commercial-scale battery recycling facility located in the Tahoe-Reno Industrial Center (TRIC) at 2500 Peru Drive, McCarran, Nevada, to expand operations of its first-of-kind lithium-ion battery recycling technologies.

The demand for domestically produced and sustainably sourced battery metals has grown at a near insatiable rate over recent years, as the domestic manufacturing capacity of lithium-ion batteries has grown exponentially from less than 50 GWh/year to now over 700 GWh/year of operational and announced capacity. This rapid growth in demand has been further amplified with the passage of the Inflation Reduction Act (IRA) in the Fall of 2022, which includes mechanisms to incentivize electric vehicle manufacturers and consumers to purchase electric vehicles (EVs) that source battery metals from domestic manufacturers.

In response to this dramatically increased demand for its recycled products from domestic automotive and battery OEMs, ABTC has entered into agreements to purchase a move-in ready, commercial-scale battery recycling facility, that will allow the company to rapidly implement its internally-developed lithium-ion battery recycling technologies at significantly higher capacity than previously planned. This approximately 137,000 square foot facility is currently vacant and was previously used for the recycling of lead-acid batteries, and as such is already designed and permitted for similar operations. While all of the legacy processing equipment has been removed, the facility is already equipped with the necessary infrastructure equipment including the electrical distribution, HVAC, compressed air, nitrogen, water treatment, material handling, analytical quality control, and operational control rooms necessary to implement ABTC’s internally-developed lithium-ion battery recycling technologies.

“We are excited to be able to capitalize on this opportunity to accelerate the first commercial-scale implementation of our integrated lithium-ion battery recycling technologies,” stated ABTC CEO Ryan Melsert. “The purchase of this existing facility was significantly lower cost than constructing a new facility of similar design, and the fact that it is move-in ready with the necessary infrastructure equipment already installed will allow us to accelerate our start of commercial-scale operations.”

For the last several years, ABTC has been validating and optimizing its first-of-kind battery recycling technologies for the low-cost and low environmental impact recovery of critical battery materials from defective and end-of-life batteries, and the refining of these battery materials to meet battery grade material specifications for reintroduction into the domestic supply chain to enable a closed loop circular economy. In 2019, ABTC detailed the operations of this integrated battery recycling system in a global competition hosted by BASF, and was subsequently selected as the sole winner of the battery recycling portion of the Circularity Challenge. In 2021, ABTC was then awarded a $2M battery recycling grant through the U.S. Advanced Battery Consortium (USABC), which is comprised of the US Department of Energy, General Motors, Ford, and Stellantis, for a commercial-scale project currently underway to demonstrate that recycled battery metal products from domestic U.S. resources can be produced at lower cost than, and at significantly improved social and environmental impact, than conventionally mined virgin minerals.

Most recently in November 2022, ABTC was selected for a competitive U.S. DOE grant for a $20M project to develop and commercialize a set of Next Generation battery recycling technologies to even further enhance the recovery of recycled products and reduce the cost of operations. ABTC is currently completing construction of its Global Development Center in Fernley, Nevada, where it will develop and validate these next generation battery recycling technologies at the bench scale, optimize them in pilot scale operations, and then construct and operate commercial-scale systems of these technologies to further improve the performance of its integrated battery recycling operations.

About American Battery Technology Company

American Battery Technology Company provides a key source of domestically manufactured critical battery metals to help meet the near insatiable demand from the electric vehicle, electrical grid storage, and consumer electronics industries. The company’s ESG-principled focus works to create a closed-loop circular economy for battery metals with ethical and environmentally sustainable sourcing of critical and strategic materials. Through its three divisions, lithium-ion battery recycling, primary metal extraction technologies and primary resource development, the company is uniquely positioned to supply low-cost, low-environmental impact, and domestically sourced battery metals. www.americanbatterytechnology.com.

Forward-Looking Statements

This press release contains “forward-looking statements” within the meaning of the safe harbor provisions of the U.S. Private Securities Litigation Reform Act of 1995. All statements, other than statements of historical fact, are “forward-looking statements.” Although the American Battery Technology Company’s (the “Company”) management believes that such forward-looking statements are reasonable, it cannot guarantee that such expectations are, or will be, correct. These forward-looking statements involve a number of risks and uncertainties, which could cause the Company’s future results to differ materially from those anticipated. Potential risks and uncertainties include, among others, interpretations or reinterpretations of geologic information, unfavorable exploration results, inability to obtain permits required for future exploration, development or production, general economic conditions and conditions affecting the industries in which the Company operates; the uncertainty of regulatory requirements and approvals; fluctuating mineral and commodity prices, final investment approval and the ability to obtain necessary financing on acceptable terms or at all. Additional information regarding the factors that may cause actual results to differ materially from these forward-looking statements is available in the Company’s filings with the Securities and Exchange Commission, including the Annual Report on Form 10-K for the year ended June 30, 2022. The Company assumes no obligation to update any of the information contained or referenced in this press release.

###

American Battery Technology Company

Media Contact:

Tiffiany Moehring

tmoehring@batterymetals.com

720-254-1556